BOXFORD LATHE USER'S PAGE

INTRODUCTION TO YOUR BOXFORD LATHE

Spares parts and accessories for the boxford lathe

boxford lathe models

AUD norton gearbox and power cross feed

BUD power cross feed and longititudinal feed

CUD longitudinal feed

TUD plain non screw cutting lathe

VSLvariable speed lathe with aud spec

Each of the above models come in two center heights and bed lenghts

4.5" x 18, 4.5"x 22, 5.0" x 22,

There are 30 inch models around but in small numbers, each of the above are available with two different drive systems, either with a underneath drive or a rear drive, lathes can be on cabinets or in the case of rear drive bench mounted.

BOXFORD REPLACEMENT PARTS

Some Boxfords can be up to 50 year old,not all have withstood this time well,basically the main workings will last for ever but such things as cross slide screws and nuts wear out and lose there accuracy,now RDG can supply you replacement boxford parts to bring your lathe back to its former glory.some attachments have been improved in design and quality and all are available now.remember boxford aud,bud and cud lathes are basicly the same machine but different spec,so all the parts are interchangable,so if you buy a gearbox or powercrossfeed unit from us they will fit all lathes

LATHE STEADY FOR 4 1/2" BOXFORD'S

BOXFORD LATHE 3 PIN STEADY ( FIXED STEADY )

FITS ALL STANDARD 4 1/2" CENTRE HEIGHT MACHINE'S, WILL FIT ALL AUD, BUD, CUD, TUD ETC , ALL COMPLETE ETC
CLICK HERE FOR A LARGER PICTURE

BOXFORD COMPOUND GEARS

Note-Gears needed to cut metric threads on a non-gearbox imperial lathe are 20T,100T,and 127/100 combination.

Gears needed to cut imperial threads on a non-gearbox metric lathe are 18T,22T,26T,38T,54T,64T,88T plus two compound gears 135/127 and 48/24.

Metric lathes with-out a screw cutting gearbox were supplied with the following gears as standard 24T,28T,30T,36T,40T,44T,48T,52T,60T.

To convert a imperial lathe with a screw cutting gearbox to cut metric threads ,gears needed are 24T,26T,28T,32T,36T,44T,48T,and 127/100 compound gear.

To convert a metric lathe with a screw cutting gearbox to cut imperial threads,gears needed are 18T,22T,26T,38T,54T,64T,88T,and compound gears 135/127 and 48/24.

THERE MAY BE A SHIPPING DELAY ON THESE GEARS, YOU WILL BE CONTACTED IF THERE OUT OF STOCK.

BOXFORD TI QUICK CHANGE TOOLPOST SET (special offer)

Quality quick change toolpost for boxford laths,fits aud.bud,and cud models,all parts hardened and ground, set complete with 2 standard holders,one boring holder and 1 parting holder.

Main Block 3" square x 2" high with a 5/8 Bore

( this set is larger than the myford set )

CROSS SLIDE LEAD SCREW (POWERFEED)

A new cross slide lesd screw fits all AUD,BUD,CUD models with power cross feed,comes in either imperial or metric thread.

BOXFORD T-NUTS

SET OF FOUR T-NUTS TO FIT BOXFORD VERTICAL SLIDE OR T-SLOTTED CROSS SLIDE,

TOOLPOST SPANNER 5/16" / 8MM SQUARE

LATHE TOOLPOST SPANNER

5/16" / 8mm square

used on interchangeable toolpost's

BOXFORD TOP SLIDE LEAD SCREW

A new replacement top slide lead screw to fit Boxford AUD,BUD.CUD,TUD models,comes in either imperial or metric threads.

TOP SLIDE BRONZE NUT

A new boxford replacement bronze top slide nut,fits AUD.BUD,CUD, models,comes in either imperial or metric threads

NEW SADDLE HALF NUTS

New replacement saddle half nuts,fits all Boxford AUD,BUD,CUD models comes in either imperial or metric pitches, new saddle nuts eliminate "jump out"when using traverse,over the years they become worn and impossible to replace,until now

THERE MAY BE A SMALL DELAY IN SHIPPING, YOU WILL BE NOTIFYED IF THERE IS A DELAY DUE TO MANUFACTURING TIME.

KEATS ADJUSTABLE ANGLE PLATE

A NEW AND UNUSED KEATS ANGLE PLATE,USED CLAMPED ON LATHE FACE PLATE, THE KEATS INCORPORATES A DEEP VEE,SO THAT THE BORE IS TRUE, A MUST ATTACHMENT IF YOU ARE BORING CYLINDERS, OR MACHINING CRANK PINS, UNIT IS PRECISION GROUND ON ALL LOCATIONS, 2 HIGH TENSILE SCREWS CLAMP WORK, VEE WILL HOLD UP TO 1-3/4" DIA WORK, SIZE-4 3/4" LONG,3 3/4" HIGH,AND 1 3/4" WIDE, 2 X 13/4" SLOTS TO SECURE TO FACE PLATE, IDEAL SIZE FOR MYFORD LATHE
CLICK HERE FOR A LARGER PICTURE

SMALL ANGLE PLATE

A small precision angle plate has 3 slots on one face and 2 slots on the other, size lenght 6" x 2 1/4" x 2/14" wide, this is a perfect shape to attach onto a face plate, please see supersize picture
CLICK HERE FOR A LARGER PICTURE

5"BACK PLATE THREADED TO SUIT BOXFORD

5" Back plate threaded to suit boxford,supplied slightly oversize for turning down.

HBM 100MM FRONT LOAD 3 JAW CHUCK

SELF CENTERING 3 JAW LATHE CHUCK

100MM DIAMETER

INTERNAL / EXTERNAL JAWS ARE INCLUDED

22MM THROUGH BORE

MAX SPEED 3500

FRONT MOUNT MAKES FITTING OF BACK PLATE EASY

A QUALITY CHUCK

MORE DETAILS........>

HBM 125MM FRONT LOAD 3 JAW CHUCK

SELF CENTERING 3 JAW LATHE CHUCK

125MM DIAMETER

MAX SPEED 3500

FRONT MOUNT MAKES FITTING OF BACK PLATE EASY

INTERNAL / EXTERNAL JAWS ARE INCLUDED

A QUALITY CHUCK

MORE DETAILS........>

Rotating tailstock turret 2 morse taper

A rotating tailstock turret

SOMETIMES KNOWN AS A QUAD HEAD

on a 2 morse taper shank

perfect for the myford boxford user

comes complete with, 2 drill chucks and keys, 1 x 13/16" diestock holder and 1 x revolving centre

all heads screw on to the turret so other attachments can be made to fit

the head rotates simply by lifting a lever, how easy is that

normal price is £129.00

BUY NOW FOR ONLY £59.50

click here for a larger picture

CENTRE DRILLS

Centre drills are designed with spiral flutes to give long tool life and high quality to the centre holes where accurate centering is essential in certain operations. Available in 4 different sizes.

FULL SET OF 3 MORSE TAPER COLLETS ( IMPERIAL )

FULL SET OF 3 MORSE TAPER COLLETS,10 COLLETS IN SET, THE SET IS FROM 1/8" - 3/4", SIZES 1/8", 3/16", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4". ALL COLLETS ARE NEW AND UNUSED, COME COMPLETE IN FITTED WOODEN STORAGE BOX, ALL HAVE A STANDARD 12MM THREAD FOR THE DRAWBAR. THESE COLLETS CAN BE USED ON A LATHE OR MILLER, IF WISHING TO USE ON A LATHE YOU SIMPLY NEED TO FIND/MAKE A LENGHT OF 12MM BAR TO PULL THE COLLET TIGHTLY INTO THE HEAD STOCK OF YOUR MACHINE (3MT ONLY
CLICK HERE FOR A LARGER PICTURE

PARTING SYSTEMS FOR SMALL LATHES

PARTING SYSTEMS FOR SMALL LATHES, ITEM SHOWN FITTED IN A MYFORD QUICKCHANGE HOLDER, TAKES A STANDARD 5/16" BLADE AND IS ONLY 1/8" THICK, GOOD FOR SMALL WORK/BUT WILL ALSO DO LARGER WORK, THIS UNIT IS NEW AND UNUSED, AND COMES WITH A NEW BLADE (QUICKCHANGE HOLDER NOT INCLUDED)

PLEASE TAKE A LOOK AT OUR OTHER PARTING / TURNING TOOLS WHITHIN ITS OWN SECTION ON OUR PRODUCTS PAGE

BARGAIN PRICE OF ONLY £8.09 + VAT

TWO MORSE TAPER BLANK END ARBOR (MYFORD/BOXFORD)

TWO MORSE TAPER BLANK END ARBOR WITH 3/8" x 16TPI THREAD TO TAKE A DRAWBAR. OVERALL LENGTH 102mm, END IS 28mm DIAMETER x 30mm LONG. TAPER SHANK IS HARDENED, END IS SOFT TO ALLOW MACHINING. CAN BE USED TO MAKE END MILL HOLDER, DRILL ARBOR, THREADED ARBOR OR MANY OTHER APPLICATIONS, IDEAL FOR MYFORD OWNERS

ADJUSTABLE MAGNETIC COOLANT KIT

ADJUSTABLE MAGNETIC COOLANT KIT, . THIS IS SUITABLE FOR COOLING/LUBRICATING IN THE MACHINING PROCESS, THERE ARE A TAPERED PIPE FITTING THAT CAN BE CONECTED VIA YOUR REMAINING COOLANT SYSTEM, THE BASE HAS A VERY STRONG MAGNET SO THAT YOU CAN DIRECT YOUR COOLANT/OIL ANYWERE ON THE MACHINE, THE LENGHT OF THE FLEXIBLE COOLANT PIPE IS 9", (extra flexi pipe can be orderd at extra cost)

FULL SET OF 3 MORSE TAPER COLLETS ( METRIC )

FULL SET OF 3 MORSE TAPER COLLETS,10 COLLETS IN SET, THE SET IS FROM 2-16MM, SIZES 2MM 3MM 5MM 6MM 8MM 10MM 13MM 14MM 16MM . ALL COLLETS ARE NEW AND UNUSED, COME COMPLETE IN FITTED WOODEN STORAGE BOX, ALL HAVE A STANDARD 12MM THREAD FOR THE DRAWBAR. THESE COLLETS CAN BE USED ON A LATHE OR MILLER, IF WISHING TO USE ON A LATHE YOU SIMPLY NEED TO FIND/MAKE A LENGHT OF 12MM BAR TO PULL THE COLLET TIGHTLY INTO THE HEAD STOCK OF YOUR MACHINE (3MT ONLY)

MAGNIFYING EQUIPMENT

NETQUOTEVAR:LINK