THIS SECTION US CURRENTLY UNDER CONSTRUCTION, PLEASE BE PATIENT
The Items that our currently out of stock are on order and will be in stock shortly |
|
 |
 | INTRODUCTION TO YOUR BOXFORD LATHE
Ref: 12142
Spares parts and accessories for the boxford lathe
boxford lathe models
AUD norton gearbox and power cross feed
BUD power cross feed and longititudinal feed
CUD longitudinal feed
TUD plain non screw cutting lathe
VSLvariable speed lathe with aud spec
Each of the above models come in two center heights and bed lenghts
4.5" x 18, 4.5"x 22, 5.0" x 22,
There are 30 inch models around but in small numbers, each of the above are available with two different drive systems, either with a underneath drive or a rear drive, lathes can be on cabinets or in the case of rear drive bench mounted.
|
|
|
BOXFORD REPLACEMENT PARTS
Some Boxfords can be up to 50 year old,not all have withstood this time well,basically the main workings will last for ever but such things as cross slide screws and nuts wear out and lose there accuracy,now RDG can supply you replacement boxford parts to bring your lathe back to its former glory.some attachments have been improved in design and quality and all are available now.remember boxford aud,bud and cud lathes are basicly the same machine but different spec,so all the parts are interchangable,so if you buy a gearbox or powercrossfeed unit from us they will fit all lathes |
|
|
 | CROSS SLIDE BRONZE NUTS
Ref: 12200
A new boxford replacement bronze cross slide nut,fits all AUD,BUD.CUD models,comes in either imperial or metric.
Price: £39.13
(£45.98 Including VAT at 17.5%)
cross slide bronze nut boxfordplease choose imperial or metric
|
|
|
|
|
|
|
 | BOXFORD COMPOUND GEAR 127T/135T
Ref: 348732
127T/135T Compound Gears needed to cut imperial threads on a non-gearbox metric lathe are 18T,22T,26T,38T,54T,64T,88T plus two compound gears 135/127 and 48/24.
Price: £85.00
(£99.88 Including VAT at 17.5%)
OUT OF STOCK |
|
|
| BOXFORD COMPOUND GEAR 100T/127T
Ref: 1086
100T/127T Compound Gear is needed to cut metric threads on a non-gearbox imperial lathe are 20T,100T,and 127/100 combination.
Price: £65.00
(£76.38 Including VAT at 17.5%)
OUT OF STOCK |
|
|
 | BOXFORD T - SLOTTED CROSS SLIDE
Ref: 12197
A new T-slotted cross slide unit allowing work to be mounted for milling/boring or mounting a vertical slide. Fits all AUD,BUDand CUD models,simply remove old cross slide and exchange cross slide nut,slide on new tee-slotted cross slide, its as easy as that. Unit made of grade A casting.with top surface ground flat, comes with new fitted gib strip and is graduated in degrees for top slide angle. This unit opens up many more machining operations for your boxford lathe than any other adaptation. THESE NEED TO BE ORDERED SO THERE MAY BE A PRODUCTION TIME OF 3-4 WEEKS
Price: £114.89
(£135.00 Including VAT at 17.5%)
|
|
|
|
|
|
|
|
|
|
|
 | BOXFORD BORING TABLE
Ref: 12198
A new T-slotted boring table allows larger work to be mounted for boring and milling. Fits all AUD,BUD and CUD models. Simply remove your machine cross slide and exchange cross slide nut,slide on boring table,unit will now move x-y as cross slide did. machined from grade A casting, has five machined Tee-slots (three horizontaly and two vertically),unit size 8" x 7" and 1" thick,top suface is ground flat,fitted with a new gib strip and ready to use,this unit opens up many more machining operations for your boxford lathe.
|
|
|
