3" rotary table 3" rotary table Overall height of table is 1 5/8" Ideal for the small mill Also will fit on myford vertical slide Use hozizontal / vertical Vertical centre hight 1-5/8" Table in horizontal hight 1- 5/8" HAND WHEEL CAN BE SET TO ZERO Hand wheel in 10 min divisions Bronze worm wheel and steel worm 36:1 RATIO Gear meshing to take up wear Revised model : exclusive to rdgtools THIS TABLE IS MADE BY HBM TOOLS CLICK HERE FOR A LARGER IMAGE |
 |
4" VERTEX ROTARY TABLE (HORZ/VERTICAL) 4" VERTEX ROTARY TABLE TABLE CAN BE USED HORIZONTAL/VERTICAL TABLE DIAMETER 110MM CENTRE BORE 2 MORSE TAPER 3 MACHINED SLOTS BASE 145 X 130 X 80MM WORM HARDENED AND GROUND GEAR RATIO 90;1 GRADUATED 360 DEGREES ONE TURN = 4 DEGREES COLLER GRADUATIONS 2 MIN STEPS WEIGHT ONLY 7.5KG More... |
|
8 x Tee Nuts to fit the 4" Vertex Rotary Table (7/16") 8 x Tee Nuts to fit the 4" Vertex Rotary Table |
|
HBM 100MM ROTARY TABLE WITH MYFORD FIXING HBM ROTARY TABLE MADE FOR MYFORD LATHE USERS (SUPERB QUALITY) 100MM (4" DIA ) , 55MM HIGH GRADUATED O-360 DEGREES TWO LOCATING TEE SLOTS THAT FIT DIRECT ONTO MYFORD VERTICAL SLIDE BY INTERNAL TEE NUTS ( SUPPLIED ) ALSO INCLUDED MYFORD THREAD NOSE LOCATES IN CENTRE HOLE AND SECURED WITH TEE-NUTS ( SUPPLIED ) THIS NOSE OPENS A WHOLE NEW WORLD TO MILLING ON YOUR LATHE THIS UNIT CAN BE USED AS A NORMAL SMALL ROTARY TABLE ON YOUR MILL OR LATHE BUT WHEN NEEDED IT CAN BE FITTED TO YOUR MYFORD VERTICAL SLIDE IN SECONDS ONCE NOSE IS THEN FITTED IT CAN HOLD 3-JAW CHUCK OR 4-JAW CHUCK AND FACE PLATE ALLOWING MILLING WORK NEVER KNOWN ON YOUR MYFORD LATHE ONLY AVAILABLE FROM RDGTOOLS SPECIFICATION ONE 100 ROTARY TABLE ( WITH INTERNAL TEE NUTS ) THREADED NOSE 1-1/8" X 12 TPI ( MYFORD THREAD ) TEE NUTS AND SCREWS TO SECURE. CLICK HERE FOR A LARGER PICTURE |
|
4" TILTING ROTARY TABLE SMALL LTILTING ROTARY TABLE,BASE IS 145MM X 126MM WITH TWO 10MM MOUNTING HOLES SEPERATED BY 110MM,STANDS 66MM TALL (IN FLAT POSITION),TABLE DIAMETER 100MM, WEIGHT 4.9KG. TABLE IS GRADUATED 0-360 DEGREES IN 5 DEGREE DIVISIONS,WINDING HANDLE IS GRADUATED 0-10 DEGREES IN 5 MINUTE DIVISIONS,CAN BE DISENGAGED FOR RAPID ROTATION OF TABLE,TABLE SURFACE HAS FOUR RADIAL T-SLOTS 5/16" WIDE,TIKLTS UP TO 90 DEGREES WITH A SCALE MARKED IN 1 DEGREE GRADUATIONS,UNIT WELL SUITED FOR MODEL ENGINEERING APPLICATIONS,SMALL ENOUGH TO BE MOUNTED ON SMALL MILLS OR ON A LATHE VERTICAL SLIDE OR CROSS SLIDE.
<More...>
|
|
6" vertex rotary table horiz/vertical 6" vertex rotary table, will stand horizontal and vertical height 100mm worm is hardened and ground ratio 90:1 worktable graduated 360 degrees one rotation is 4 degrees 2 morse taper center sleeve each table comes complete with test report. More... |
|
8" vertex rotary table horiz/verticalOUT OF STOCK Ref: 8INCHVERT
Price: £160.85 (£189.00 Including VAT at 17.5%)
8" vertex rotary table, will stand horizontal and vertical height 135mm worm is hardened and ground ratio 90:1 worktable graduated 360 degrees one rotation is 4 degrees 3 morse taper center sleeve each table comes complete with test report. More... |
|
|
|
DIVIDING SET FOR 6" ROTARY TABLE DIVIDING SET FOR 6" ROTARY TABLE (ABOVE) CAN BE EASILY FITTED TO 6" ROTARY TABLE CONVERTING IT TO A DIVIDING ROTARY TABLE,3 DIVIDING PLATES GIVING 15,16,17,18,19,20,21,23,27,29,31,33,37,39,41,43,47,49 DIVISIONS,COMPLETE WITH ALL SCREWS HANDLE ECT.
|
|
ADAPTOR FOR ROTARY TABLE 6" MYFORD THREADOUT OF STOCK Ref: 823ADCHUCK
Price: £12.72 (£14.95 Including VAT at 17.5%)
CHUCK ADAPTOR FOR ROTARY TABLE THREADED FOR MYFORD CHUCK ALLOWS A CHUCK WITH MYFORD THREAD TO BE FITTED TO A ROTARY TABLE CAN BE USED ON 6" VERTEX,6"SHOBA AND OUR OWN 6" HMB ROTARY TABLE. PLACE IN TAPER AND LOCK UNDER UNDER TABLE THEN SIMPLY SCREW ON MYFORD CHUCK. competeters price £25.00 RDG PRICE £14.95 |
|
SMALL DIVIDING HEAD / INDEXING HEADOUT OF STOCK Ref: 46
Price: £127.32 (£149.60 Including VAT at 17.5%)
(DUE BACK AT THE END OF OCTOBER) First this unit is a 24 hole indexing unit,with a 2-1/16" center hight,nose is threaded same as myford lathe so will allow mounting of myford chucks and attachments. Bore is 2mt and will allow center to center work with tailstock. Base hole centers will allow mounting on myford vertical slide or cross slide. Takes only seconds to add dividing attachment ,that will allow micro dividing to 1000th of a degree. 3 dividing plates included to give all prime numbers |
|
VERTEX ( BS-0 ) DIVIDING HEAD NEW AND UNUSED VERTEX SEMI - UNIVERSAL DIVIDING HEAD (BS0) ,TAILSTOCK DIVIDING PLATES AND CHUCK BACKPLATE ARE INCLUDED, THREAD IS ML7/SUPER 7 THREAD (1 1/8 X 12TPI) CENTER HEIGHT 100MM. DIVIDING HEAD CAN DIVIDE IN ANY ANGLE BY DIRECT,INDIRECT,THE RATIO BETWEEN THE WORM GEAR IS 40-1.HAS HARDENED AND GROUND SPINDLE,THE SWIVEL HEAD CAN BE LOCKED AT ANY ANGLE FROM 10 DEGREES BELOW HORIZONTAL TO 90 DEGREES VERTICAL POSITION.HAS THREADED SPINDLE NOSE TO ACCOMODATE BACK PLATE,SO CHUCK CAN BE EASILY FITTED,HAS 3 DIVIDING PLATES,2,3,4,6,8,12,24,EASY INDEXING OF ALL NUMBERS FROM 2-50 AND MANY NUMBERS FROM 52-380,UNIT IS VERY ACCURATE A QUALITY UNIT, PLEASE CLICK THE PICTURE FOR MORE SPEC'S ON THE BS0 DIVIDING HEAD <More...> |
|
VERTEX ( BS-1 ) DIVIDING HEAD NEW AND UNUSED VERTEX SEMI - UNIVERSAL DIVIDING HEAD (BS1) ,TAILSTOCK DIVIDING PLATES AND CHUCK BACKPLATE ARE INCLUDED ,DIVIDING HEAD CAN DIVIDE IN ANY ANGLE BY DIRECT,INDIRECT,THE RATIO BETWEEN THE WORM GEAR IS 40-1.HAS HARDENED AND GROUND SPINDLE,THE SWIVEL HEAD CAN BE LOCKED AT ANY ANGLE FROM 10 DEGREES BELOW HORIZONTAL TO 90 DEGREES VERTICAL POSITION.HAS THREADED SPINDLE NOSE TO ACCOMODATE BACK PLATE,SO CHUCK CAN BE EASILY FITTED,HAS 3 DIVIDING PLATES,2,3,4,6,8,12,24,EASY INDEXING OF ALL NUMBERS FROM 2-50 AND MANY NUMBERS FROM 52-380,UNIT IS VERY ACCURATE A QUALITY UNIT, PLEASE CLICK THE PICTURE FOR MORE SPEC'S ON THE BS1 DIVIDING HEAD <More...> |
|
VERTEX RAPID INDEXER WITH 3 JAW CHUCK 100MMOUT OF STOCK Ref: 34729
Price: £126.81 (£149.00 Including VAT at 17.5%)
VERTEX RAPID INDEXER WITH 100MM 3 JAW CHUCK SIMPLE AND RAPID OPERATION, COMES COMPLETE WITH INTERNAL AND EXTERNAL CHUCK JAWS DIVIDUAL 24 NOTCH MOVEMENT (15 DEGREE) HORIZONTAL OR VERTICAL OPERATION 30MM BORE A MUST FOR MILLING OPERATIONS More... |
|
VERTEX RAPID INDEXER WITH 3 JAW CHUCK 125MMOUT OF STOCK Ref: 3472995
Price: £143.83 (£169.00 Including VAT at 17.5%)
VERTEX RAPID INDEXER WITH 125MM 3 JAW CHUCK SIMPLE AND RAPID OPERATION, COMES COMPLETE WITH INTERNAL AND EXTERNAL CHUCK JAWS DIVIDUAL 24 NOTCH MOVEMENT (15 DEGREE) HORIZONTAL OR VERTICAL OPERATION 30MM BORE A MUST FOR MILLING OPERATIONS More... |
|
 |
|
