Tooling for Boxford Lathes

RDG Tools Catalogue » Boxford Lathe Users Page »  Tooling for Boxford Lathes

Boxford 9Boxford 9" Face Plate 1 1/2" x 8tpi
Ref: 70950

Boxford 9" Face Plate 1 1/2" x 8tpi
Fits Aud Bud Cud Lathes (Standard Boxford Nose thread)
Aquality Plate

More...

Price: £42.13
(£49.50 Including VAT at 17.5%)

100mm 3 Jaw Lathe Chuck with Direct Boxford Fitting100mm 3 Jaw Lathe Chuck with Direct Boxford Fitting
Ref: 1931

100mm 3 Jaw Lathe Chuck with Boxford Fitting "1-1/2" x 8tpi"
Also fits some Denford Viceroy Machines
This chuck is designed to be taken out of the box and screwed directly onto your AUD/BUD/CUD/TUD ETC Model Lathe
comes complete with internal and external jaws and chuck key
Din Quality Rated chuck

More...

Price: £62.00
(£72.85 Including VAT at 17.5%)

Boxford Lathe change Gear Stud with BushBoxford Lathe change Gear Stud with Bush
Ref: 892347box

Boxford Lathe change Gear Stud with Bush
Used on the gear train of the AUD, BUD, AND CUD Boxford Lathes


More...

Price: £7.23
(£8.50 Including VAT at 17.5%)

2mt Boxford Chuck Adaptor 2mt Boxford Chuck Adaptor "For Rotary Tables"
Ref: 87587

2mt Boxford Chuck Adaptor "For Rotary Tables"
The end comes out and is used to secure the adaptor in the rotary table
A quality unit
More...

Price: £11.91
(£13.99 Including VAT at 17.5%)

2mt Lathe Drill Tapping Attachment2mt Lathe Drill Tapping Attachment
Ref: 1900

Lathe Drill Tapping Attachment
The attachment consists of a 13mm drill chucks and a parallel shaft
the sleeve is a 2mt with parallel bore
so the main body will slide in the sleeve and allow hand tapping
Very handy in the lathe when tapping small bores straight
More...

Price: £12.72
(£14.95 Including VAT at 17.5%)

2 MORSE TAPER TAILSTOCK DIE HOLDER2 MORSE TAPER TAILSTOCK DIE HOLDER
Ref: 1899

UNIT WILL HOLD 4 DIFFERENT SIZES OF DIES,
SIZES IT WILL HOLD ARE 13/16", 1", 1 1/4", 1 1/2"
THE HEAD SLIDES UP AND DOWN ON THE SHAFT
PERFECT FOR THREADING ON ANY MACHINE WITH A 2 MORSE TAPER TAILSTOCK

Price: £16.60
(£19.51 Including VAT at 17.5%)

HBM 125MM FRONT LOAD 3 JAW CHUCKHBM 125MM FRONT LOAD 3 JAW CHUCK
Ref: 89743Ba

SELF CENTERING 3 JAW LATHE CHUCK
125MM DIAMETER
MAX SPEED 3500
FRONT MOUNT MAKES FITTING OF BACK PLATE EASY
INTERNAL / EXTERNAL JAWS ARE INCLUDED
A QUALITY CHUCK

MORE DETAILS........>

Price: £48.94
(£57.50 Including VAT at 17.5%)

55"BACK PLATE THREADED TO SUIT BOXFORD
Ref: 12166


5" Back plate threaded to suit boxford,supplied slightly oversize for turning down.
Price: £10.87
(£12.77 Including VAT at 17.5%)

3-2 MT HEADSTOCK REDUCER3-2 MT HEADSTOCK REDUCER
Ref: 1264

3-2 MT HEADSTOCK / MILL QUILL REDUCER
NEW AND ONLY FROM RDGTOOLS
ALLOWS 2MT TOOLING TO BE USED IN
3MT MACHINE SPINDLE
YOUR DRAWBAR PASSES THREW
UNIT HARDENED AND GROUND

Price: £6.38
(£7.50 Including VAT at 17.5%)

PARTING SYSTEMS FOR SMALL LATHESPARTING SYSTEMS FOR SMALL LATHES
Ref: 12522


PARTING SYSTEMS FOR SMALL LATHES, ITEM SHOWN FITTED IN A MYFORD QUICKCHANGE HOLDER, TAKES A STANDARD 5/16" BLADE AND IS ONLY 1/8" THICK, GOOD FOR SMALL WORK/BUT WILL ALSO DO LARGER WORK, THIS UNIT IS NEW AND UNUSED, AND COMES WITH A NEW BLADE (QUICKCHANGE HOLDER NOT INCLUDED)

PLEASE TAKE A LOOK AT OUR OTHER PARTING / TURNING TOOLS WHITHIN ITS OWN SECTION ON OUR PRODUCTS PAGE

BARGAIN PRICE OF ONLY £8.09 + VAT
Price: £8.09
(£9.51 Including VAT at 17.5%)

BOXFORD TI QUICK CHANGE TOOLPOST SET (51mm)BOXFORD TI QUICK CHANGE TOOLPOST SET (51mm)
Ref: 610
Quality quick change toolpost for boxford laths,fits aud.bud,and cud models,all parts hardened and ground, set complete with 2 standard holders,one boring holder and 1 parting holder.
Main Block 3" square x 2" high with a 5/8 Bore
( this set is larger than the myford set )
Price: £80.85
(£95.00 Including VAT at 17.5%)

BOXFORD T-NUTSBOXFORD T-NUTS
Ref: 12155


SET OF FOUR T-NUTS TO FIT BOXFORD VERTICAL SLIDE OR T-SLOTTED CROSS SLIDE,
Price: £4.21
(£4.95 Including VAT at 17.5%)

Revolving Tailstock Chuck Adaptor for Boxford LatheRevolving Tailstock Chuck Adaptor for Boxford Lathe
Ref: 1635

Revolving Tailstock Chuck Adaptor for Boxford Lathe.
when a workpiece is extended from the chuck it causes problems when trying to supporting it,
only thing you can do is use a steady, but these get in the way, so this is what the adaptor is used for
its a triple bearing heavy duty revolving centre with a Boxford 1 1/2" x 8 thread,
so you can grip both ends of the workpiece,
great for holding large diameter boiler tube etc.

More...

Price: £30.00
(£35.25 Including VAT at 17.5%)

RDG Tools Catalogue » Boxford Lathe Users Page »  Tooling for Boxford Lathes